Sign in
Harbour Freight Tools
- (305) 828-7922
-
www.harborfreight.com
- Recommended in multiple social networks
Recommendations & Reviews
Hours of operation
Monday8:00AM - 8:00PMTuesday8:00AM - 8:00PMWednesday8:00AM - 8:00PMThursday8:00AM - 8:00PMFriday8:00AM - 8:00PMSaturday8:00AM - 8:00PMSunday9:00AM - 6:00PM
OPEN NOW
28 recommendations and reviews from 28 people
-
Referral from
November 18, 2019
chillintheforest asked:Keeping things charged with no wiring I'm going to be traveling in a Subaru Outback (close enough to a van right?
not-a-person-people replied:Depends on the loads needed... laptop likely needs 300 w so buy a 400 w inverter and plug it in to a 12 v. Cell phone and other small accessories need 2.4A so buy a tiny 100 W and plug in all the things. You can run a bunch of small inverters while driving or idling with out tripping the fuses. That's the cheap way out. Check harborfreight.com
-
Referral from
November 5, 2017
Anthony W. asked:I need a good and accurate OBDII scanner...any suggestionsPeter H. replied:HarborFreight.com
-
Referral from
May 3, 2017
Margo S. asked:Saw a post on here, (I think) on someone who used a lazer light mounted on her sewing machine, she used it to have the line so we didn't have to take the time to draw to make have square triangles. Looking for one, where do I start looking.....Menards is not the place. Thanks in advance!!Dianne S. replied:I found mine on line at Harborfreight.com
-
Referral from
February 3, 2017
Alexandria R. asked:iso FREE - Granbury, TX (76049) Does anyone have size 20mm (1inch) gauges for cheap or know any cheap online stores?Kenneth T. replied:Check harborfreight.com
-
Referral from
November 24, 2016
Barbara C. asked:i have a question does anyone know how to get a hold of the people in charge of the harbour freight and the businesses moving into the old Wal-Mart I need to get a hold of them and f you know of any other new businesses coming into town please contact me with who and person to contact when and where at. thank youKimberly P. replied:http://m.harborfreight.com
-
Referral from
May 17, 2016
Isabella A. asked:Looking for a full time employer been looking everywhere and been putting apps every place I can think of any suggestions?????Glenda W. replied:Fill out app on line for HarborFreight.com
-
Referral from
January 28, 2016
Leslie A. asked:Does anyone know where you purchase the white tile address numbers? My house used to have them posted but the mount they were on broke so I am looking to replace it. Edit: like this picture https://www.oakparkhome-hardware.com/images/exterior_hardware/house_numbers/portland_ceramic_house_numbers_by_fern_hill_pottery/large/fern_hill_bracket_4_number.jpgAntonio M. replied:Light Up numbers Harborfreight.com Or 68 th & Greenfield West Allis or Whitnall & Pennsylvania Cudahy
-
Referral from
October 22, 2015
Dan K. asked:Anyone know best place too get wheel dollies too put a 65 LeMans on for winter storage too move too one side of garageRick D. replied:Harborfrieght.com
-
Referral from
August 16, 2015
Alan M. asked:Iso a good mechanic just bought a car and it continues to run hot its a 2002 Lincoln ls. Can anyone give me some insight on wat to do it would be greatly appreciatedThomas R. replied:Www.harborfreight.com
-
Referral from
August 3, 2015
Jamie G. asked:Hi guys, can anyone point me to a link for a T-Molding router bit in the UK?Nuthaday J. replied:For really cheap ones that will do a couple of projects Go to harborfreight.com You get a set of 5 different bits. All slot cutters for $25 American dollars. They have two sets. Each has a different shank size. Make sure you know what shank size your router takes. Thinner or fatter
-
Referral from
May 29, 2015
Star J. asked:Does anyone have any painters plastic or a large tarp they could part with??Jason P. replied:Check out www.harborfreight.com they should have coupons and cheap tarp
-
Referral from
April 5, 2015
Cotton C. asked:i am looking to do some carving in rock can any one tell me best place to find dremel bits or something like that????Brian C. replied:http://www.harborfreight.com
-
Referral from
February 5, 2015
Bonnie I. asked:Replacing toilet and plywood around toilet but tile in hall impossible to get up. Has anyone done this? How? Any suggesstions?Anton S. replied:I used something like this in our home bathroom tile floor and tile walls, made it a lot easier. Check the link. You can get them wherever tools are sold. This one is at Harbor Freight. just to give an idea. http://www.harborfreight.com/.../variable-speed...
-
Referral from
January 30, 2015
High f. asked:Sara asks: Looking for headphone for my son to help reduce noise in class. Any suggestions on ones people like? Any good noise canceling ones that can allow him to hear instruction, but filter out background noise, aka other children talking?Bree C. replied:Harbor Freight carries noise protection at reasonable prices. HarborFreight.com
-
Referral from
December 13, 2014
Jason S. asked:Im looking for a decent compresor for light body work and paint for a fair price any recomendationsBrian P. replied:http://m.harborfreight.com/.../21-gal-25-hp-125-psi-cast...
-
Referral from
November 5, 2014
Josecito B. asked:Were can I find a fishing cart?Frank L. replied:http://www.harborfreight.com/.../24-in-x-36-in-folding...
-
Referral from
October 28, 2014
Nicholas W. asked:Ok need some help I power slide better on sidewiners instead of my new calipers trucks any one know why ?Arne A. replied:because calipers aren't made to slide on, this is a caliper: http://www.harborfreight.com/.../9 df7.../i/m/image_17953.jpg
-
Referral from
December 11, 2013
Theo B. asked:does anyone have a stud finder??? (insert gay jokes) need to mount up the new TV tonight.
Cym M. replied:you don't know what harbor freight is? It's one of the best stores around. LoL.. sells a bunch of good stuff for cheap. http://www.harborfreight.com/
-
Referral from
December 7, 2013
Tiffany B. asked:Looking for a job, anywhere hiring? Please comment of places anyone knows of (: thank you
Cindy R. replied:Harborfrieght.com its tools etc... they're always hiring and goodwill
-
Referral from
November 18, 2013
Frank T. asked:I need a little help from my Mechanic Friends. This may be a simple fix but I'm not sure. My brake line is leaking on the van. It's leaking near the driver side sliding door. Is there a way to cut and replace that part or do I need to buy a whole line?Twinkasauras R. replied:http://www.harborfreight.com/...
-
Referral from
September 28, 2013
Patrick G. asked:Anyone know of someone who sharpens axe blades and such? Looking for a recommendation of someone in Duluth/Superior.Heather Y. replied:http://www.harborfreight.com/...
-
Referral from
July 21, 2013
Amie S. asked:Heat guns: Do any of you have recommendations for purchase, and/or models to stay away from? Looking to warp styrofoam, maybe light plastic for haunt use, inexpensive but reliable. Thanks!Albert R. replied:Make sure to go to the website and sign up for their email newsletter (E-MAIL SIGN UP) that includes discount coupons and free items with any purchase http://www.harborfreight.com/
-
Referral from
July 18, 2013
Annette O. asked:Anyone know where I can get one of those "tarp" buildings? I dont really want it made of tarps, would prefer heavier material. Don't want to spend thousands.Ignacio D. replied:Harbor Freight may have something as well. harborfreight.com
-
Referral from
July 17, 2013
Rob G. asked:Can anyone recommend a good torque wrench, I'm not rich so don't say snap-on :-)
Cameron S. replied:Check out www.harbourfreight.com
-
Referral from
January 4, 2007
cooter34609 asked:I'm new here, looking to find alittle help with my problem.I bought a ShopFox combo about 4 months ago , and its a real PITA to convert from one to the other. So I pulled the mill part off and its on...
Hi Dennis, I can't comment on the fitting nor do I know if the table for standard X3 is different from the Super X3. In any event, Grizzly www.grizzly.com sells both the X3 (G0463) and Super X3 (G0619) and might supply the parts. Harbor Freight www.harborfreight.com sells the X3 (93885) and will likely suppply parts for it. Of course you could ask Lathemaster if they could assist. Take care, DBN
-
Referral from
October 20, 2004
Barry_Roth asked:I want to buy an airbrush for modeling but I'm really bewildered by the number of kinds available. I would be most grateful for any recommendations by list members, or reports of experience -- good...
Greetings, I have a couple of air brushes I picked up from Harbor Freight for about $9 and $20. The $9 is a single action external mix brush and is all I have used so far. The other is a dual action internal mix but I haven't used it yet. The cheaper of the 2 can be found in stores sometimes for around $5. This might be an option for you to get started without much cost and then as your skill improves you can invest in a more expensive brush. Hobby and some toy stores carry a Badger 150 (I think) external mix brush ($20 the last time I saw one). I have seen an airbrush and compressor set for $50 at Wal-mart. www.harborfreight.com my 0.02 Rob
-
Referral from
June 24, 2003
Addicted C. asked:I notice in the service manual they give torque settings for pretty much everything, even the oil filter. What is a good torque wrench?? Something that can be found at WalMart, Lowes or AutoZone???
I have one for many years that I bought from Harbor Freight (www.harborfreight.com) Its durable and accurate. Its the half inch drive model. They have it on special quite often for less than ten dollars. You can get a half inch to three eights adapter locally. That way you can use 3/8 drive sockets with it. I just went to their website. Those torque wrenches are just under $20 now. If you have the time to wait, they will be at half price again. Norm
-
Referral from
July 26, 2000
wood_29@yahoo.com asked:I think iam going to purchase an 24" alaskan mill. Does anyone know where I can get a good price on one in Canada? I live in Ontario if that helps. Thanks
Think about getting the 36" mill in case you ever get a longer bar on your chainsaw. The only different between the 24" and 36" mills is the length of the aluminum rails. Both mills adjust from about a 5" width to their stated maximums. The extra weight of the 36" will be minimal, so will the price increase. The best prices for these mills would probably be northern-online.com or baileys-online.com or harborfreight.com. Conrad S.
New Review
Please wait....
Please wait...
