Electricians in Cameron, MO

Call Jason's dad. 816 6541570. He'll tell you how to fix the problem.

I am a heating a cooling guy. I work for home performance group llc. I am Nate certified with a decade of experience and a master mechanical liscensed. Don't assume the electrical is the problem, it very well could be a failing compressor over drawing or dead short. Or it could be to small of wiring, as the wiring heats up because of large amp draws the conductivity reduces. It's known as the k factor. If it turns out your ac is the problem give us a call we can definately take good care of you. 816-632-2814

My number is 816-589-8292. I won't be available til Monday, walking in a benefit tomorrow and family activities all weekend. Would be able to take a look monday

Why is it on a 100 amp breaker,,,is that the panel main,,,most a.c. units are wired with 10. Awg wire on a 30 amp circuit,,,sounds like you need an a.c. guy,,,schilndlets is good in Cameron 8167241257

Well they should most definitely be on separate circuits. Usually no bigger than a double 60. Depends on wire size length and equipment amp draw. You can call Aaron Ramsey at impact electric he does a lot of service work in Cameron and could probably take care of you guys. I would say your wire size should be 8 gauge and down. Depending on length. That will give you a basis.

Robert if you have no luck getting Aaron Ramsey you could try Thompson electric or pro vin able electric also in cameron,,,still no luck give me a message I'm no longer in biz for myself but I still do some on the side,,any competent electrician should be able to tell you your problem with the layout you have and tell you if you need an a.c. guy or not

Use Aaron Ramsey !!!

Greg Wendt he did that for me. Very nice man

Jeff Young (816) 646-5475

Joe Dorton is the best!

Thompson Electric.

Stephanie Lynn Farr Savannah Farr tag our family electricians